When securing a flash-type evaporator for an extended period of time, you should ().
- Afill the unit with saltwater
- Bfill the unit with de-scaling compound
- Ccompletely drain the unit
- Dtightly seal the unit to exclude air
When securing a flash-type evaporator for an extended period of time, you should ().
1、The demisters installed in a flash-typ
The demisters installed in a flash-type evaporator serve to ()Adeaerate the first effect distillateBfilter the condensed flash vaporsCdeaerate the first and second effect distillateDremove small water droplets entrained in the flashed vapor
2、In a flash evaporator, scale as a resu
In a flash evaporator, scale as a result of higher than normal temperatures in most likely to occur in the ()Asecond stage feed heaterBsaltwater feed heaterCdistillate coolerDsecond stage vapor separator
3、In a flash type evaporator, the brine
In a flash type evaporator, the brine overboard pump is vented directly to the()Asaltwater heater shellBthe condensation of the saltwater feedCair ejectors, eductors, or a separate vacuum pumpDcondensation of the distillate
4、When a vacuum boiling evaporator works
When a vacuum boiling evaporator works, the hot jacket water will pass over the tube stack and () the sea water passing through the tubes.AdisposeBdissolveCheatDdissipate
5、On a multistage flash-type evaporator,
On a multistage flash-type evaporator, the flash chamber is ()Acombined as part of the salt water feed heaterBthe open area above the brine ...
6、When securing a hook to the end of a w
When securing a hook to the end of a wire rope you should use().AA bowline knotBA long spliceCAn overhand knot with a wire rope clipDWire rope clips with a thimble eye