The thermal expansion valve reacts directly to the ()
- Atemperature in the space being cooled
- Bliquid refrigerant pressure at the solenoid valve
- Cpressure drop across the evaporator coils
- Drefrigerant gas superheat at the coil outlet
The thermal expansion valve reacts directly to the ()
1、The amount of expansion space to be le
The amount of expansion space to be left in a fuel tank when fuel oil is being received, is determined by the ().Aquantity of fuel to be...
2、Thermostatic expansion valves can be a
Thermostatic expansion valves can be adjusted for ().Asuction pressure onlyBhead pressure onlyCsuperheat onlyDsuction pressure and box temperature
3、The expansion valve on a Freon system
The expansion valve on a Freon system controls the ().Asuperheat of the gas leaving the compressorBback pressure in the evaporatorCtemperature of the iceboxDsuperheat of the gas leaving the evaporator
4、If the thermal bulb of an expansion va
If the thermal bulb of an expansion valve is incorrectly placed at the center of the coil instead of the end, it will ().Aincrease the cap...
5、When designing an expansion within the
When designing an expansion within the same data center, when is a pre-sales TDA absolutely required by IBM?()A for a SAN768B DirectorB for a second TS3500 Tape LibraryC for a second EXP5060 Expansion UnitD for an additional DS8300 Expansion Frame
6、After passing through the expansion va
After passing through the expansion valve the refrigerant should be in the state of ().AvaporBliquidCsolidDNone of the above is tree