Which will cause the high pressure cutout to stop the compressor in a R-22 system?（）
- ACondenser leakage
- BA shortage of liquid refrigerant
- CExcessive frost on the evaporator
- DNot enough condenser cooling water
问题
Which will cause the high pressure cut
参考解析：
分类：船舶辅助机械题库
相关推荐
-
1、If the head pressure is too high,（）
If the head pressure is too high,（）Athe relief valve should open before the high-pressure cutoutBthe relief valve should open and let excess ...
-
2、The purpose of the low pressure cut-ou
The purpose of the low pressure cut-out switch is to （）.Amaintain liquid refrigerant at the suction of the compressorBmaintain a preset suctio...
-
3、One cause of high head pressure occurr
One cause of high head pressure occurring in a refrigeration system can be （）.Ainsufficient cooling water flow to the condenserBa low refrigerant charge in the systemCthe liquid valve is open too muchDhigh evaporator superheat
-
4、Which will cause a wire rope to fail（）
Which will cause a wire rope to fail（）.AUsing a medium graphite grease as a lubricantBOperating a winch too slowCUsing a sheave with an undersized throatDA sheave diameter of 24 times the wire's diameter
-
5、The high-pressure fuel opens the fuel
The high-pressure fuel opens the fuel valve and is sprayed into the cylinder in tiny droplets known as （）.AinjectionBpenetrationCatomizationDcompressio
-
6、The high pressure in fuel injection sy
The high pressure in fuel injection system of the diesel engine is produced by the （）.Ainjector pumpBfuel injectorCgovernorDturbocharger