A towing vessel should be on the crest of a wave at the same time as its tow and in the trough at the same time. The term used to describe this is().
- Atow strain
- Bcatenary length
- Cbeing in step
- DWilliamson's Tow
A towing vessel should be on the crest of a wave at the same time as its tow and in the trough at the same time. The term used to describe this is().
1、Paints and solvents on a vessel should
Paints and solvents on a vessel should be().Astored safely in a cool dark non-ventilated area until work is completedBresealed and returned to...
2、How should TCP/IP be configured on the
How should TCP/IP be configured on the ent0 network adapter?()Aifconfig en0 192.168.10.1 netmask 255.255.255.0 gateway 192.168.10.254Bifconfig ent0...
3、A vessel being towed will show().
A vessel being towed will show().Aa forward masthead lightBsidelights and a sternlightCa towing lightDAll of the above
4、On a long ocean tow,the bridle should
On a long ocean tow,the bridle should be made up of two equal lengths of().AchainBwireCnylonDmanila
5、All personnel on board a vessel should
All personnel on board a vessel should be familiar with the rescue boat’s().Aboarding and operating procedureBmaintenance schedulesCnavigational systemsDfuel consumption rate
6、Paints and solvents on a vessel should
Paints and solvents on a vessel should be().Astored safely at the work site until work is completedBreturned to the paint locker after each useCcovered at all times to protect from ignition sourcesDstored in a suitable gear locker