To prevent excessive () in the transverse girders, the tie bolts are positioned as close to the center of the crankshaft as possible.
- Athermal stresses
- Bbending moments
- Cthermal loads
- Dsurface tensio
To prevent excessive () in the transverse girders, the tie bolts are positioned as close to the center of the crankshaft as possible.
1、Excessive alkalinity of the water in a
Excessive alkalinity of the water in an auxiliary boiler can cause ().Acaustic embrittlement of the boiler metalBacidic corrosion of the boiler metalChard scale deposits on the boiler tubesDetching of the heat exchange surface
2、Excessive oil foaming in the crankcase
Excessive oil foaming in the crankcase of a refrigeration compressor can result in ().Aoverheated compressor bearingsBexcess lube oil viscosityCcarbon deposits on the compressor piston ringsDwax crystals forming in the lubricant
3、Water in the fuel can prevent the engi
Water in the fuel can prevent the engine from starting, prevent it from developing full power, or ()Arun at an irregular speedBcreate high lube oil temperatureCcause the engine to over-speedDcause blue smoke in the exhaust
4、In the common rail system, excessive p
In the common rail system, excessive pressure in the header may be caused by ()Aimproper adjustment of the bypass valveBa dribble in the fuel injection nozzleCinsufficient leak-off through injection nozzle packingDa malfunctioning injection nozzle
5、To prevent the unnecessary loading of
To prevent the unnecessary loading of an air conditioning system while maintaining the designed dry bulb temperature and relative humidity in an...
6、Excessive clearances in the main or cr
Excessive clearances in the main or crank-pin bearings will sometimes be indicated by () before any bearing knock is heard.Aloss of flow in ...