Connecting rods in a diesel engine are used to connect the ().
- Aengine to the bed
- Brocker arm to the camshaft
- Ccrankshaft to the gear train
- Dpiston to the crankshaft
Connecting rods in a diesel engine are used to connect the ().
1、A connecting rod in a four-stroke/cycl
A connecting rod in a four-stroke/cycle diesel engine is subject to()Atension load twice each crankshaft revolutionBcompression load during power...
2、In a diesel engine, when refitting pi
In a diesel engine, when refitting piston rings you should ()Ⅰ.check the ring gap at the smallest diameter of the cylinderⅡ. Remove carbon from the ring grooveAⅠ onlyBⅡ onlyCboth Ⅰ and ⅡDneither Ⅰ nor Ⅱ
3、In a diesel engine,() works as working
In a diesel engine,() works as working medium and changes the heat energy to mechanical energy, changes the reciprocating movement to rotary ...
4、In a medium speed diesel engine, a tr
In a medium speed diesel engine, a trunk type piston may be cooled by()Ⅰ.oil circulation though passages in the piston crownⅡ.heat transfer through piston rings and liner wallAⅠ onlyBⅡ onlyCeither Ⅰ or ⅡDneither Ⅰ or Ⅱ
5、The intake valves in a diesel engine a
The intake valves in a diesel engine are reseated by ().Acam followersBpush rodsCcombustion gasesDvalve spring
6、In a normally operating diesel engine,
In a normally operating diesel engine, the main cause of lubricating oil contamination in the crankcase is a result of the ().Ametal particle...