Soot blowers should be used in proper sequence so that()
- Aexcess stresses will not be set up in the boiler
- Bthe decks will not be covered with soot
- Cthe soot will be swept toward the uptakes
- Dthere will not be a loss of steam pressure
Soot blowers should be used in proper sequence so that()
1、Place names used should be those ().
Place names used should be those ().Aspecified by international authoritiesBspecified by national authoritiesCon standard mapDon the chart or Sailing Directions in use
2、How should signal flares be used after
How should signal flares be used after you have abandoned ship and are adrift in a liferaft?().AImmediately use all the signals at onceBUse ...
3、Which channel and mode should be used
Which channel and mode should be used when initiating a distress alert transmission().AChannel 6 DSCBChannel 6 RadiotelephonyCChannel 13 Radiotelephony and channel 16 DSCDChannel 70 DSC
4、Expansion tank should be used to remov
Expansion tank should be used to remove () from cooling water.AscaleBsludgeCchemicalsDair
5、Charts should be corrected by using in
Charts should be corrected by using information published in the().ALight ListBAmerican Practical NavigatorCNotice to MarinersDCoast Pilot
6、Proper use shall be made()radar equipm
Proper use shall be made()radar equipment.AwithBtoCforDof