可学答题网 > 问答 > CCNA(640-801)题库
目录: 标题| 题干| 答案| 搜索| 相关
问题

A network administrator wants to add a


A network administrator wants to add a line to an access list that will block only Telnet access by the hosts on subnet 192.168.1.128/28 to the server at 192.168.1.5. What command should be issued to accomplish this task?()

  • A access-list 101 deny tcp 192.168.1.128 0.0.015 192.168.1.5 0.0.0.0 eq 23 access-list 101 permit ip any any
  • B access-list 1 deny tcp 192.168.1.128 0.0.0.15 host 192.168.1.5 eq 23 access-list 1 permit ip any any
  • C access-list 1 deny tcp 192.168.1.128 0.0.0.255 192.168.1.5 0.0.0.0 eq 21 access-list 1 permit ip any any
  • D access-list 101 deny tcp 192.168.1.128 0.0.0.240 192.168.1.5 0.0.0.0 eq 23 access-list 101 permit ip any any
  • E access-list 101 deny ip 192.168.1.128 0.0.0.240 192.158.1.5 0.0.0.0 eq 23 access-list 101 permit ip any any
  • F access-list 101 deny ip 192.168.1.128 0.0.0.15 192.168.1.5 0.0.0.0 eq 23 access-list 101 permit ip any any
参考答案
参考解析:
分类:CCNA(640-801)题库
相关推荐

1、The network administrator needs to add

The network administrator needs to address seven LANs. RIP version 1 is the only routing protocol in use on the network and subnet 0 is not...

2、Your customer wants to build a network

Your customer wants to build a network for a financial trading floor that has a requirement for multiple high-value transactions, which are als...

3、In a point-to point network, which add

In a point-to point network, which address are OSPF hello packets sent to?()A127.0.0.1B192.168.0.5C223.0.0.1D172.16.0.1E224.0.0.5F254.255.255.255.255

4、A network administrator wants to add a

A network administrator wants to add a line to an access list that will block only Telnet access by the hosts on subnet 192.168.1.128/28 to ...

5、A network administrator wants to ensur

A network administrator wants to ensure that only the server can connect to port Fa0/1 on a Catalyst switch. The server is plugged into the ...

6、A network administrator wants to ensur

A network administrator wants to ensure that only the server can connect to port Fa0/1 on a Catalyst switch. The server is plugged into the ...